Fortinet NSE7_OTS-6.4 Dumps Questions Updates For Effective Exam Preparation

On By passitdump

If you may be preparing for the NSE7_OTS-6.4 exam, then we recommend that you look for valid Fortinet NSE7_OTS-6.4 exam dumps. This can really help you. Recognizing your challenge, Passitdump has updated the new Fortinet NSE7_OTS-6.4 dumps questions with 35+ practice exam questions and answers to ensure you are ready and successfully passing the NSE 7 Network Security Architect certification Fortinet NSE 7 – OT Security 6.4.

Check the NSE7_OTS-6.4 Free dumps questions below to better understand the NSE7_OTS-6.4 exam.

Question 1:

What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)

A. Enhanced point of connection details

B. Direct VLAN assignment

C. Adapter consolidation for multi-adapter hosts

D. Importation and classification of hosts

 

Correct Answer: AB

Question 2:

Refer to the exhibit and analyze the output.

Which statement about the output is true?

A. This is a sample of a FortiAnalyzer system interface event log.

B. This is a sample of an SNMP temperature control event log.

C. This is a sample of a PAM event type.

D. This is a sample of FortiGate interface statistics.

 

Correct Answer: A

Question 3:

Refer to the exhibit.

In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.

Which statement about the topology is true?

A. PLCs use IEEE802.1Q protocol to communicate each other.

B. An administrator can create firewall policies in the switch to secure between PLCs.

C. This integration solution expands VLAN capabilities from Layer 2 to Layer 3.

D. There is no micro-segmentation in this topology.

 

Correct Answer: D

Question 4:

In a wireless network integration, how does FortiNAC obtain connecting MAC address information?

A. RADIUS

B. Link traps

C. End station traffic monitoring

D. MAC notification traps

 

Correct Answer: A

Question 5:

Which three common breach points can be found in a typical OT environment? (Choose three.)

A. Global hat

B. Hard hat

C. VLAN exploits

D. Black hat

E. RTU exploits

 

Correct Answer: CDE

Question 6:

Refer to the exhibit.

You are navigating through FortiSIEM in an OT network.

How do you view information presented in the exhibit and what does the FortiGate device security status tell you?

A. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.

B. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.

C. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.

D. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.

 

Correct Answer: B

Question 7:

An OT network administrator is trying to implement active authentication.

Which two methods should the administrator use to achieve this? (Choose two.)

A. Two-factor authentication on FortiAuthenticator

B. Role-based authentication on FortiNAC

C. FSSO authentication on FortiGate

D. Local authentication on FortiGate

 

Correct Answer: AB

Question 8:

Refer to the exhibit.

An OT administrator ran a report to identify device inventory in an OT network. Based on the report results, which report was run?

A. A FortiSIEM CMDB report

B. A FortiAnalyzer device report

C. A FortiSIEM incident report

D. A FortiSIEM analytics report

 

Correct Answer: A

Question 9:

An OT administrator deployed many devices to secure the OT network. However, the SOC team is reporting that there are too many alerts, and that many of the alerts are false positive. The OT administrator would like to find a solution that eliminates repetitive tasks, improves efficiency, saves time, and saves resources.

Which products should the administrator deploy to address these issues and automate most of the manual tasks done by the SOC team?

A. FortiSIEM and FortiManager

B. FortiSandbox and FortiSIEM

C. FortiSOAR and FortiSIEM

D. A syslog server and FortiSIEM

 

Correct Answer: C

Question 10:

Refer to the exhibit.

You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.

What must you do to achieve this objective?

A. You must use a FortiAuthenticator.

B. You must register the same FortiToken on more than one FortiGate.

C. You must use the user self-registration server.

D. You must use a third-party RADIUS OTP server.

 

Correct Answer: A

Question 11:

An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then

users should be challenged with active authentication. What should the OT supervisor do to achieve this on FortiGate?

A. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.

B. Enable two-factor authentication with FSSO.

C. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.

D. Under config user settings configure set auth-on-demand implicit.

 

Correct Answer: D

Question 12:

An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.

On which device can this be accomplished?

A. FortiGate

B. FortiEDR

C. FortiSwitch

D. FortiNAC

 

Correct Answer: D

Question 13:

Refer to the exhibit.

Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)

A. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.

B. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.

C. IT and OT networks are separated by segmentation.

D. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.

 

Correct Answer: CD

Question 14:

Which three methods of communication are used by FortiNAC to gather visibility information? (Choose three.)

A. SNMP

B. ICMP

C. API

D. RADIUS

E. TACACS

 

Correct Answer: ACD

Question 15:

An OT architect has deployed a Layer 2 switch in the OT network at Level 1 the Purdue model-process control. The purpose of the Layer 2 switch is to segment traffic between PLC1 and PLC2 with two VLANs. All the traffic between PLC1 and PLC2 must first flow through the Layer 2 switch and then through the FortiGate device in the Level 2 supervisory control network.

What statement about the traffic between PLC1 and PLC2 is true?

A. The Layer 2 switch rewrites VLAN tags before sending traffic to the FortiGate device.

B. The Layer 2 switches routes any traffic to the FortiGate device through an Ethernet link.

C. PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.

D. In order to communicate, PLC1 must be in the same VLAN as PLC2.

 

Correct Answer: C