HPE6-A73 Dumps Updated | Aruba Certified Switching Professional Exam Materials

On By passitdump

PassITDump has updated you with the latest HP Aruba Certified Switching Professional (ACSP) V1 HPE6-A73 dumps and is the best exam material for the Aruba Certified Switching Professional exam.

The HPE6-A73 dumps have the most comprehensive set of exam questions and answers, including all the content of the exam, making it easy to pass the Aruba Certified Switching Professional exam.

All you need to do is download it and practice it.

Read the HPE6-A73 free dump Q&A, then download the dumps

Question 1:

Which statement is correct regarding ACLs and TCAM usage?

A. Applying an ACL to a group of ports consumes the same resources as specific ACE entries

B. Using object groups consumes the same resources as specific ACE entries

C. Compression is automatically enabled for ASIC TCAMs on AOS-CX switches

D. Applying an ACL to a group of VLANs consumes the same resources as specific ACE entries

Correct Answer: B

Question 2:

What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?

A. Only a traffic rate and burst size can be defined for a queue

B. Limits can be defined only for broadcast and multicast traffic

C. Rate limiting and egress queue shaping can be used to restrict inbound traffic

D. Rate limiting and egress queue shaping can be applied globally

Correct Answer: A

Question 3:

A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high- availability with dual-control planes.

Which solution should the administrator implement?

A. AOS-CX 8325

B. AOS-CX 6300

C. AOS-CX 6400

D. AOS-CX 8400

Correct Answer: A

Question 4:

A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:

radius-server tracking user-name monitor password plaintext aruba123

What is the purpose of this configuration?

A. Implement replay protection for AAA messages

B. Define the account to implement downloadable user roles

C. Speed up the AAA authentication process

D. Define the account to implement change of authorization

Correct Answer: C

Question 5:

A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code. The solution leverages a third-party AAA solution. The company is replacing existing access switches with AOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies for both wired and wireless traffic.

Which solution should the company implement?

A. RADIUS dynamic authorization

B. Downloadable user roles

C. IPSec

D. User-based tunneling

Correct Answer: A

Question 6:

A network engineer is having a problem adding a custom-written script to an AOS-CX switch\’s NAE GUI. The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch: What should the engineer perform to fix this issue?

A. Install the script\’s signature before installing the new script

B. Ensure the engineer\’s desktop and the AOS-CX switch are synchronized to the same NTP server

C. Enable trust settings for the AOS-CX switch\’s SSL certificate

D. Remove a script that is no longer used before installing the new script

Correct Answer: D

Question 7:

Which option correctly defines how to identify a VLAN as a voice VLAN on an AOS-CX switch?

A. Switch(config)# port-access lldp-group Switch(config-lldp-group)# vlan

B. Switch(config)# port-access role Switch(config-pa-role)# vlan access

C. Switch(config)# vlan Switch(config-vlan-)# voice

D. Switch(config)# vlan voice

Correct Answer: C

Question 8:

An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities. The campus involves a core, as well as multiple access layers. Which feature should the administrator implement to allow both VSX-capable core switches to process traffic sent to the default gateway in the campus VLANs?

A. VRF

B. VRRP

C. IP helper

D. Active gateway

Correct Answer: B

Question 9:

What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)?

A. Uses IPSec to protect the management and data traffic

B. Uses IPSec to protect the management traffic

C. Supports only port-based tunneling

D. Uses the same management protocol as Aruba APs

Correct Answer: C

Question 10:

An administrator is implementing a multicast solution in a multi-VLAN network. Which statement is true about the configuration of the switches in the network?

A. IGMP snooping must be enabled on all interfaces on a switch to intelligently forward traffic

B. IGMP requires join and leave messages to graft and prune multicast streams between switches

C. IGMP must be enabled on all routed interfaces where multicast traffic will traverse

D. IGMP must be enabled on all interfaces where multicast sources and receivers are connected

Correct Answer: B

Question 11:

How is voice traffic prioritized correctly on AOS-CX switches?

A. By defining device profiles with QOS settings

B. By placing it in the strict priority queue

C. By implementing voice VLANs

D. By implementing weighted fair queueing (WFQ)

Correct Answer: C

Question 12:

A network administrator is managing a network that deploys a multicast service. The administrator has multiple streams successfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination address of 239.0.0.1. However, clients who have not joined the stream are receiving it.

What should the administrator do to fix this problem?

A. Verify that IGMP is enabled between the switches connecting the multicast source and receivers

B. Change the destination multicast address to 239.1.1.1

C. Define the 239.0.0.1 stream on the rendezvous point (RP)

D. Define the 239.0.0.1 stream on the PIM candidate bootstrap router

Correct Answer: C

Question 13:

Which protocols are used by NetEdit to interact with third-party devices? (Choose two.)

A. telnet

B. SNMP

C. SSH

D. Restful API

E. CDP

Correct Answer: BC

Question 14:

An administrator is implementing a downloadable user role solution involving AOS-CX switches. The AAA solution and the AOS-CX switches can successfully authenticate users; however, the role information fails to download to the switches. What policy should be added to an intermediate firewall to allow the downloadable role function to succeed?

A. Allow TCP 443

B. Allow UDP 1811

C. Allow UDP 8211

D. Allow TCP 22

Correct Answer: C

Question 15:

What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?

A. Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN

B. Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing

C. Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing

D. Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN

Correct Answer: B