NS0-162 Dumps Updated – Best Materials For NetApp Certified Data Administrator (ONTAP) Exam
Use the updated NS0-162 dumps to pass the NetApp Certified Data Administrator (ONTAP) exam, the best learning material for exam preparation. The NetApp NS0-162 dumps contain the latest NS0-162 exam question answers and practicing it will help you improve your exam until you finally win the Certified Data Administrator (NCDA) certified NS0-162 exam.
You can get NS0-162 free dumps Q&A, here
Question 1:
You want to prepare your ONTAP cluster and your ESXi cluster to connect NFS datastores over a 10-GbE network using jumbo frames.
In this scenario, which three configurations would accomplish this task? (Choose three.)
A. Enable jumbo frames with an MTU of 1500 for your ESXi hosts
B. Enable jumbo frames with an MTU of 9000 for your ONTAP cluster
C. Enable jumbo frames with an MTU of 1500 for your ONTAP cluster
D. Enable jumbo frames with an MTU of 9000 for your ESXi hosts
E. Enable jumbo frames with an MTU of 9216 for your switches
Correct Answer: BDE
Question 2:
When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true? (Choose two.)
A. The images must be manually uploaded to the cluster by using the ONTAP System Manager interface
B. The latest available images will appear in the ONTAP System Manager interface
C. The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site
D. The update history is available within the ONTAP System Manager interface
Correct Answer: BD
Question 3:
Click the Exhibit button.
You have an SVM-DR relationship as shown in the exhibit. You are given a new requirement to use SnapMirror Synchronous (SM-S) for the data volumes in NFS-SVM-01.
In this scenario, which solution is supported to enable SM-S in ONTAP 9.8 software?
A. Set up new SM-S relationships from the FAS2720 to a new destination
B. Set up NetApp Cloud Sync with a cloud broker in AWS to replicate to a new destination
C. Modify the existing SVM-DR policy to use sync mode
D. Set up new SM-S relationships from the AFF A220 to a new destination
Correct Answer: B
Question 4:
Which two types of capacity tiers are supported with FabricPool aggregates in ONTAP 9.8? (Choose two.)
A. StorageGRID Object Storage
B. S3 Object Store
C. SWIFT Object Store
D. NFS Export
Correct Answer: AB
Question 5:
Click the Exhibit button.
A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3. Referring to the exhibit, what is the problem?
A. The volume is in read-only
B. The logical interface does not allow the NFSv3 protocol
C. The host IP address does not match the export policy rule
D. The volume is not mounted in the namespace
Correct Answer: C
Question 6:
Click the Exhibit button.
After an ONTAP upgrade, you notice that several cluster LIFs are not on their home ports as shown in the exhibit.
Which LIF option would change this outcome?
A. the failover-policy option
B. the data-protocol option
C. the subnet-name option
D. the auto-revert option
Correct Answer: A
Question 7:
A customer wants to migrate a series of LUNs from a third-party array to a FAS. In this scenario, which two tools would the customer use? (Choose two.)
A. XCP
B. NKS
C. ADP
D. FLI
Correct Answer: AD
Migrate a series of LUNs from a third-party array to a FAS.
Question 8:
Your company requires WORM archiving of data on their ONTAP cluster. The data must not be able to be deleted even by an administrator.
Which ONTAP feature fulfills this requirement?
A. SnapVault software
B. SnapMirror software
C. SnapLock Enterprise
D. SnapLock Compliance
Correct Answer: D
Reference: http://doc.agrarix.net/netapp/doc/Archive and Compliance Management% 20Guide.pdf (9)
Question 9:
Click the Exhibit button.
You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit.
In this scenario, which two protocols are supported? (Choose two.)
A. NVMe
B. SMB
C. NFS
D. iSCSI
Correct Answer: CD
Reference: https://docs.netapp.com/us-en/occm/pdfs/sidebar/Manage_Cloud_Volumes_ONTAP.pdf
Question 10:
You have commissioned a new AFF A250 MetroCluster over IP configuration. Your company requires an automatic switchover to the surviving site in case of a site disaster.
What do you need to configure to fulfill this requirement?
A. ONTAP Mediator service
B. cluster failover
C. automated unplanned switchover
D. storage failover
Correct Answer: A
Reference: https://docs.netapp.com/us-en/ontap-metrocluster/pdfs/sidebar/ Install_a_MetroCluster_IP_configuration.pdf (3)
Question 11:
Click the Exhibit button.
You have a 2-node NetApp FAS2750 ONTAP cluster. You create a new 20-GB LUN in a new 100-GB volume and write 10 GB of data to the LUN. No storage efficiencies are enabled for the volume or aggregate.
Referring to the exhibit, which two statements are true? (Choose two.)
A. ONTAP reports that the volume is using 10 GB of its containing aggregate
B. ONTAP reports the volume as 20% full
C. ONTAP reports that the volume is using 100 GB of its containing aggregate
D. ONTAP reports the volume as 10% full
Correct Answer: AB
Question 12:
Your company runs a NetApp AFF A220 cluster as a file server for NFS and SMB. You want to use one of the unused ports to connect a single Windows host directly, using FC. You have converted the UTA2 ports e0e and e0f to FC and equipped them with a 16-Gbps FC transceiver. Your Windows host fails to connect to the storage.
In this scenario, which action solves the problem?
A. Use the arbitrated loop topology on storage and host
B. Use an Ethernet switch between storage and host
C. Use the point-to-point topology on all ports
D. Use an FC switch between storage and host
Correct Answer: B
Question 13:
What establishes a quorum in a 4-node cluster?
A. TieBreaker
B. epsilon
C. cluster peer
D. ONTAP Mediator
Correct Answer: B
Reference: https://library.netapp.com/ecmdocs/ECMP1196798/html/GUID-EFE1DEF4-8B87-4C4A-8E4EC6C79F760710.html
Question 14:
Click the Exhibit button.
The availability of the remote cluster in the peering relationship shows “Partial”.
Referring to the exhibit, what is the reason for this status message?
A. The intercluster LIFs on the local cluster are unavailable and not able to communicate to the remote cluster
B. The remote cluster does not have its cluster license applied properly
C. Some nodes in the local cluster are not able to contact some or all nodes in the remote cluster
D. The local cluster is unable to authenticate successfully to the remote cluster
Correct Answer: C
Explanation:
Some nodes in the local cluster are not able to contact some or all nodes in the remote cluster.
Question 15:
All SMB users are reporting that their network share performance is slow on a new NetApp FAS500f HA pair. You determine that the users have converged network adapters (CNAs) with flow control enabled and no option to disable.
In this scenario, which two flow control settings are recommended on the NetApp ONTAP physical ports? (Choose two.)
A. Disable flow control end-to-end on data network ports
B. Disable flow control end-to-end on cluster network ports
C. Enable flow control end-to-end on data network ports
D. Enable flow control end-to-end on cluster network ports
Correct Answer: BC