DES-DD33 Dumps Has Just Been Updated, The Perfect EMC DES-DD33 Exam Preparation

passitdump.com Updated DES-DD33 dumps are the highest quality preparation material for the exam and will be the perfect preparation for the EMC DES-DD33 exam using dumps.

The key to passing the EMC DES-DD33 exam is study and preparation. Being prepared is an important thing. Passitdump DES-DD33 dumps help you prepare.

DES-DD33 free dumps are questions from the latest full DES-DD33 dumps. Check DES-DD33 free questions to get a better understanding of DES-DD33 exams.

Question 1:

DRAG DROP

What are the steps to configure the Retention Lock Compliance?

Select and Place:

Correct Answer:


Question 2:

DRAG DROP

What is the correct sequence of steps to configure storage for Dell EMC Cloud Tier in the DD System Manager?

Select and Place:

Correct Answer:

Reference: https://www.delltechnologies.com/asset/en-us/products/data-protection/technical-support/docu95865.pdf


Question 3:

Backup administrators have noticed slow backups on the AIX environment.

To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?

A. no and nfs_rfc1323=0

B. yes and nfs_rfc1323=0

C. no and nfs_rfc1323=1

D. yes and nfs_rfc1323=1

Correct Answer: D

larger RPC sizes, you should set the nfs_rfc1323 option Reference: https://www.ibm.com/docs/en/aix/7.2?topic=tuning-tcpip-guidelines-nfs-performance


Question 4:

An administrator is scaling Cloud Tier for a DD9400 by adding a second cloud unit. What is the required amount of metadata storage (ТВ)?

A. 120

B. 240

C. 300

D. 500

Correct Answer: B


Question 5:

A storage administrator finished the zoning between the PowerProtect DD and the NetWorker backup server. How can they verify that the zoning was completed properly and the server HBA are visible?

A. scsitarget initiator show list

B. scsitarget initiator list

C. scsitarget show initiator

D. scsitarget show initiator list

Correct Answer: A


Question 6:

Following best practices for a PowerProtect DD NFS environment, what is the recommended value for rsize and wsize?

A. 22768

B. 30008

C. 32768

D. 42768

Correct Answer: C

Reference: https://docs.oracle.com/en/database/oracle/oracle-database/18/cwlin/configuring-nfs-buffer-size-parameters-for-oracle-database.html#GUID-5F14F816-445B-4EBB-BBA2-E9DFD7E5EF96


Question 7:

What is the maximum capacity that a cloud unit can have with DD9900?

A. 64 TB

B. 576 TB

C. 1,536 TB

D. 2,016 TB

Correct Answer: B

Reference: https://nsrd.info/blog/2019/09/26/powerprotect-dd-unleash-the-beast/


Question 8:

Which are supported compression algorithms in DDOS?

A. lz, gz, and gzfast

B. bmp, lz, and gz

C. rle, lzw, and lz

D. dsp, gz, and lz

Correct Answer: A

Explanation:

Prior generation appliances compressed data using the default lz algorithm. Other types of compression algorithms such as gzfast and gz were also available.

Reference: https://www.delltechnologies.com/asset/en-sa/products/data-protection/industry-market/dell-emc-powerprotect-dd-series-appliances-hardware-assisted-compression.pdf


Question 9:

Which component executes the read/write requests in a backup environment consisting of a PowerProtect DD appliance and IBM Spectrum Protect?

A. Media Server

B. Media Agent

C. Spectrum Protect Server

D. Master Server

Correct Answer: B


Question 10:

When using the DD VTL Tape Out to Cloud feature, which status will a tape show once it is in the cloud tier vault?

A. Vaulted

B. Archived

C. Offline

D. Offsite

Correct Answer: B


Question 11:

What is a main advantage of using DD Boost instead of CIFS or NFS for a backup?

A. No requirement for an IP network to back up data

B. DD Boost does not require administration credentials

C. DD Boost uses integrated network acceleration

D. Deduplication is distributed between the backup server and client

Correct Answer: D

Explanation: Dell EMC Data Domain Boost software distributes parts of the deduplication process to the backup server(s) or application client(s), leaving the Data Domain system, powered by Intel® Xeon® processors, to focus its energy on determining what is unique and writing the new data to disk. With DD Boost, only the unique data has to travel from the backup server or client to the Data Domain system. DD Boost also gives the backup application control over replication

Reference: https://cdw-prod.adobecqms.net/content/dam/cdw/on-domain-cdw/brands/dell-emc/dell-emc-business-value-of-data-domain-white-paper.pdf


Question 12:

A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 2 ТВ of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 100 GB.

The initial backup requires 400 GB with a 10 percent increase in the data each day. Each incremental backup is 200 GB. After data reduction, each incremental backup is 20 GB.

What is the weekly burn rate (GB) after six daily incremental backups and one weekly backup?

A. 200

B. 220

C. 400

D. 440

Correct Answer: A


Question 13:

What is the preferred method to ensure backups are protected against deletion or corruption?

A. Dell EMC Cloud Tier

B. Encryption

C. Retention Lock

D. Data Invulnerability Architecture

Correct Answer: A

Explanation:

In order to keep data protection tools from getting overwhelmed by the enormous capacity requirements generated in today\’s data centers, technologies which enable data to be tiered from primary backup to secondary long term retention/

archive are becoming more attractive. Dell EMC Cloud Tier technology integrates with an Dell EMC ECS Object Storage system (on premises or hosted private cloud) to provide a massively scalable architecture. By leveraging the capabilities

of both of these platforms, IT administrators and architects can continue the path of consolidating critical backup processes, protecting complex environments mixed with unstructured data, database engines, virtual environments, while at the

same time providing the ability to meet long term.

Reference: https://www.delltechnologies.com/content/dam/uwaem/production-design-assets/en-apj/dell_emc_periodic_table_data_protection_eBook.pdf


Question 14:

Which protocol is used with Dell EMC Cloud Tier to transfer data between a PowerProtect DD appliance and the cloud?

A. FTP

B. SFTP

C. HTTPS

D. NFS

Correct Answer: D

Explanation:

A DD series appliance at a Faction data center can be used as single backup target to protect workloads across multiple clouds. Using DD Boost, CIFS, and NFS protocols.

Reference: https://www.delltechnologies.com/asset/en-us/products/data-protection/industry-market/h18759-multi-cloud-data-services-for-dell-emc-powerprotect.pdf


Question 15:

What are some possible network bottlenecks for a PowerProtect DD?

A. Configuration, wire speeds, switches and routers

B. Connectivity, firewalls, and routing protocols

C. Connectivity, routing protocols, and configuration

D. Routing protocols, switches and routers, and wire speeds

Correct Answer: A