HPE6-A79 Exam Dumps Update Your Favorite Aruba Certified Mobility Expert Written Exam Questions
PassITDump has updated the HP HPE6-A79 exam dumps with the latest Aruba Certified Mobility Expert Written exam questions to ensure it will help you pass the exam.
In the latest update of the HP HPE6-A79 exam dumps questions, there are 55 questions and answers. By learning all the updated HPE6-A79 questions, you can easily learn the Aruba Certified Mobility Expert Written exam.
You can check out the HPE6-A79 free dumps Q& below, and if you’re interested, continue downloading the HPE6-A79 exam dumps
Question 1:
A network administrator is in charge of a Mobility Master (MM) ?Mobility Controller (MC) based WLAN. The administrator has deployed an Airwave Management Platform (AMP) server in order to improve the monitoring capabilities and
generate reports and alerts.
The administrator has configured SNMPv3 and Admin credentials on both the MMs and MCs and has created Groups and Folders in the AMP server.
What two additional steps must the administrator do in order to let Airwave monitor the network devices? (Choose two.)
A. Manually add the Active MM and wait for automatic Discovery.
B. Map the AMP\’s IP address with a mgmt-config profile in the MM.
C. Set the AMP\’s IP address and Org string as DHCP option 43.
D. Manually add each MM, MC and Access Point in the AMP server.
E. Move “New” devices into a group and folder in Airwave.
Correct Answer: AB
Question 2:
A customer wants a WLAN solution that permits Aps to terminate WPA-2 encrypted traffic from different SSIDs to different geographic locations where non-related IT departments will take care of enforcing security policies. A key requirement is to minimize network congestion, overhead, and delay while providing data privacy from the client to the security policy enforcement point. Therefore, the solution must use the shortest path from source to destination.
Which Aruba feature best accommodates this scenario?
A. Inter MC S2S IPsec tunnels
B. RAPs
C. Multizone Aps
D. VIA
E. Inter MC GRE tunnels
Correct Answer: B
Question 3:
Refer to the exhibits. Exhibit 1
Exhibit 2
Exhibit 3
A network administrator wants to allow contractors to access the corporate WLAN named EmployeesNet with the contractor role in VLAN 40. When users connect, they do not seem to get an IP address. After some verification checks, the network administrator confirms the DHCP server (10.254.1.21) is reachable from the Mobility Controller (MC) and obtains the outputs shown in the exhibits.
What should the network administrator do next to troubleshoot this problem?
A. Permit UDP67 to the contractor role.
B. Remove the IP address in VLAN 40.
C. Configure the DHCP helper address.
D. Confirm there is an IP pool for VLAN 40.
Correct Answer: A
Question 4:
Refer to the exhibit: A company acquires ten barcode scanners to run inventory tasks. These WiFi devices support WPA2-PSK security only. The network administrator deploys a WLAN named scanners using the configuration shown in the exhibit. What must the network administrator do next to ensure that the scanner devices successfully connect to their SSID?
A. Set internal as the MAC authentication server group.
B. Add scanner MAC addresses in user derivation rules.
C. Enable L2 Authentication Fail Through.
D. Add scanner MAC addresses in the internal database.
Correct Answer: D
Question 5:
Refer to the exhibit.
A network administrator deploys DSCP based prioritization in the entire wired network to improve voice quality for a SIP-based IP telephony system used by the company. However, users report that calls they make from WLAN have poor audio quality, while desktop phones do not experience the same problem. The network administrator makes a test call and looks in the datapath session table.
Based on the output shown in the exhibit, what is one area that the network administrator should focus on?
A. UCC based DSCP correction
B. WMM support on the WLAN
C. Dynamic Multicast Rate Optimization
D. wired network congestion
Correct Answer: D
Question 6:
An Aruba Mobility Master (MM) – Mobility Controller (MC) solution is connected to a wired network that is ready to prioritize DSCP marked traffic. A group of WMM-enabled clients sends traffic marked at L2 only.
What must the network administrator do to map those markings to DSCP equivalent values when traffic is received by the APs?
A. Enable WMM in the SSID profile.
B. Enable WMM in the VAP profile.
C. Enable Skype4Business ALG Support.
D. Enable traffic to be marked with session ACLs.
Correct Answer: B
Question 7:
A company with 50 small coffee shops in a single country requires a single mobility solution that solves connectivity needs at both the main office and branch locations. Coffee shops must be provisioned with local WiFi internet access for customers.
The shops must also have a private WLAN that offers communication to resources at the main office to upload sales, request supplies through a computer system, and make phone calls if needed. In order to simplify network operations, network devices at the coffee shops should be cloud managed.
Which technologies best meet the company needs at the lowest cost?
A. IAP VPN
B. SD-Branch
C. Activate with RAPs
D. BOC with CAPs
Correct Answer: B
Question 8:
Refer to the exhibit.
Based on the output shown in the exhibit, which wireless connection phase has just completed?
A. L3 authentication and encryption
B. MAC Authentication and 4-way handshake
C. 802.11 enhanced open association
D. L2 authentication and encryption
Correct Answer: A
Question 9:
Refer to the exhibit.
An organization provides WiFi access through a corporate SSID with an Aruba Mobility Master (MM) – Mobility Controller (MC) network that includes PEF functions. The organization wants to have a single firewall policy configured and applied
to the employee role.
This policy must allow users to reach Web, FTP, and DNS services, as shown in the exhibit. Other services should be exclusive to other roles. The client NICs should receive IP settings dynamically.
Which policy design meets the organization\’s requirements while minimizing the number of policy rules?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: C
Question 10:
Refer to the exhibit.
A network administrator has created AAA profile for the corporate VAP. In addition to the regular Radius based authentication, the administrator needs to be able to disconnect the users from either of the two servers that are part of the “Radius” server group.
What must the administrator do next in order to achieve this goal?
A. Use the “Radius” server group as the RADIUS Accounting Server Group in the AAA profile.
B. Create two new RFC 3576 servers and assign them as the RFC 3576 servers in the AAA profile.
C. Use the “Radius” server group as both the Accounting Server Group and the RFC 3576 server in the AAA profile.
D. Use the “Radius” server group as the RFC 3576 server in the AAA profile.
Correct Answer: C
Reference: https://www.arubanetworks.com/techdocs/ArubaOS_61/ArubaOS_61_UG/AP_Config.php
Question 11:
Refer to the exhibit.
A 7008 Branch Office Controller (BOC) is deployed in a remote office behind a core router. This core does not support 802.1q encapsulation. The Mobility Controller (MC) is the gateway for two tunneling mode SSIDs, as shown in the exhibit. Which two different configuration options ensure that wireless users are able to reach the branch network through the router? (Choose two.)
A. Configure all ports of the BOC as access ports on the controller VLAN, and change the gateway of clients to the core router IP.
B. Configure the uplink of the BOC as an access port on the controller VLAN, and add static routes in the router for the SSID VLAN subnets.
C. Configure the uplink of the BOC as a trunk port that permits the controller and the SSID VLANs. The controller VLAN must be native.
D. Configure the uplink of the BOC as an access port on the controller VLAN, and enable NAT for the SSID VLANs.
E. Configure the uplink of the BOC as a trunk port, tagging the controller and the SSOD VLANs, and enable NAT for the SSID VLANs.
Correct Answer: BE
Question 12:
Refer to the exhibits. Exhibit 1
Exhibit 2 Exhibit 3
Exhibit 4
A captive portal-based solution is deployed in a Mobility Master (MM) – Mobility Controller (MC) network. A wireless station connects to the network and attempts the authentication process. The outputs are shown in the exhibits. Which names correlate with the authentication and captive portal servers?
A. ClearPass.23 is the authentication server, and cp.mycompany.com is the captive portal server.
B. ClearPass.23 is the authentication server, and MC2 is the captive portal server.
C. Internal database in MC2 is the authentication server, and cp.mycompany.com is the captive portal server.
D. cp.mycompany.com is the authentication server, and ClearPass.23 is the captive portal server.
Correct Answer: A
Question 13:
Refer to the exhibit.
A network administrator adds a Mobility Controller (MC) in the /mm level and notices that the device does not show up in the managed networks hierarchy. The network administrator accesses the CLI. executes the show switches command, and obtains the output shown in the exhibit.
What is the reason that the MC does not appear as a managed device in the hierarchy?
A. The network administrator added the device using the wrong Pre-Shared Key (PSK).
B. The network administrator has not moved the device into a group yet.
C. The digital certificate of the MC is not trusted by the MM.
D. The IP address of the MC does not match the one that was defined in the MM.
Correct Answer: D
Question 14:
Refer to the exhibit.
An Aruba network is deployed with L2 and L3 Mobility Master (MM) redundancy across two datacenters, as shown in the exhibit. The network administrator confirms that all Mobility Controllers (MC) are currently communicating with MM1, which is the L2 Active and, L3 Primary.
Which MM IP will MCs communicate with if MM1 fails?
A. 10.1.1.10
B. 10.1.1.12
C. 10.2.1.10
D. 10.2.1.21
Correct Answer: C
Question 15:
A network administrator has racked up a 7210 Mobility Controller (MC) that will be terminating 200 Aps on a medium-size branch office. Next, the technician cabled the appliance with 4SPF Direct Attached Cables (DACs) distributed between two-member switching stack and powered it up.
What must the administrator do next in the MCs to assure maximum wired bandwidth utilization?
A. Map the four physical ports to port channel 0.
B. Disable spanning tree and allocate unique VLANs to each port.
C. Manually set 10Gbps speeds on all ports.
D. Configure the same MSTP region that the switches have.
E. Make all ports trunk interfaces and permit data VLANs.
Correct Answer: C